How To Reset A Goodman Furnace?

Have you ever been in a situation where the furnace is not working perfectly suddenly in the middle of the night? The simplest way to make the heating system back to work is by resetting the furnace. If you don’t understand how to resolve the issue in the furnace, shut it down and restart it. Reset the settings, and it should work perfectly for the time being. However, you must call the HVAC repair in Apollo Beach, FL, as soon as possible for a quick check behind the issue.

How to Manually Reset a Furnace?

The easiest way to reset the furnace is by flipping the electric switch of the equipment. It will most probably set things in motion. However, the accurate way to reset the equipment would be to locate its reset button.

How to Reset The Goodman Furnace?

The main thing is how to reset the Goodman company’s furnace? Different company’s furnace systems have their methods of operating the system.

However, don’t worry when the best HVAC company in Riverview, FL, is here to help you out. The procedure that you need to follow for resetting the Goodman Furnace is as follows:

Step 1. Shut down the furnace thermostat.
Step 2. Turn back the circuit switch of the furnace. After 1 minute, flip it back to the same position.
Step 3. Remove the access panel from the furnace. With the help of the screwdriver, remove the front panel of the heating system.
Step 4. Look for the reset button in the furnace. The position of the reset button varies in every model of Goodman Furnace. Most times, it is located beside the limit switch. You can look for the place of the switch in the furnace instruction manual.
Step 5. Press the reset button and hold it for 5-10 seconds. When you see a solid red light, it means you have successfully reset your Goodman Furnace!

What To Do If You See Four Flashes in The Goodman Furnace?

If you witness four flashes in the furnace, it certainly means that something is wrong with the main limit switch of the system, or the high limit switch is left open. There could be multiple reasons:

  • Dusty and clogged filters
  • Loose wirings
  • Malfunctioning of the blower motor, control board
  • Due to the size of the duct pipes connected to the system, it is better to call the technician from the HVAC company in Riverview, FL. They’ll find the correct reason behind the issue. They will quickly resolve the problem!

Does Resetting The Furnace Help?

The reset button in every HVAC system is a safety measure that helps shut down the system if any problem is detected. The reset button resets the furnace unit before the electrical switch is tripped because of the malfunctioning of the heating system or its component.

The reset button temporarily fixes the issues inside the furnace. You might need to call the technicians to look for the exact problem that hinders the accurate working of the system. The HVAC repair in Apollo Beach will help you resolve all the HVAC issues.

John’s Air is here to assist you with their skills to fix all HVAC issues quickly and efficiently. Call us at 813-689-2722 now!